Laser Edge Banding
Solid Color Matte Skin

Product Series: Laser Edge Banding Matte Skin

Regular sizes: 1250*0.2

Thickness of the protective film: 0.06mm

With back coating: Yes

Product Colors:

WellP ABS Edge Banding - Alpine White

WellP ABS Edge Banding - Wabi-Sabi White

WellP ABS Edge Banding - Shell White

WellP ABS Edge Banding - Angora Gray

WellP ABS Edge Banding - Creamy Beige

WellP ABS Edge Banding - Cashmere Gray

WellP ABS Edge Banding - Almond Brown

WellP ABS Edge Banding - Nano Brown

WellP ABS Edge Banding - Bluebird Gray

WellP ABS Edge Banding - Cloud Gray

WellP ABS Edge Banding - Ink Gray

WellP ABS Edge Banding - Mystic Black

WellP ABS Edge Banding - Jaipur Red

WellP ABS Edge Banding - Mountain Green

WellP ABS Edge Banding - Moroccan Blue

WellP ABS Edge Banding - Midnight Purple

Size, color and protective film can all be customized.

Phone: +86 17322379627

Whatsapp: +86 17322379627

E-Mail: official@wellp.com

INQUIRY NOW

Product Details Introduction

Product Introduction:

PETG Solid Color Super Matte Decorative Film Manufactured using polyethylene terephthalate - 1,4-cyclohexanedimethanol (PETG) as the base material, precisely blended with color masterbatch and functional additives. The base film - cyclohexanedimethanol (PETG) as the base material. Precisely formulated color masterbatch and functional additives are blended to create the base film through cast extrusion. This film undergoes surface treatment using a 172nm nano-light excimer process under nitrogen protection, resulting in a new eco-friendly surface decorative material that combines ultra-matte, superior abrasion resistance, stain resistance, and anti-fingerprint properties. This series is branded as NCT Decorative Film in China.

WellP PETG Structural Diagram

1 Base film: The core material is PETG (polyethylene terephthalate glycol-1,4-cyclohexanedimethanol), a non-crystalline copolyester formed by the copolymerization of three monomers: terephthalic acid (PTA), ethylene glycol (EG), and 1,4-cyclohexanedimethanol (CHDM).

2 Coating: Utilizes a 172nm nanophotonic process with nitrogen-protected excimer treatment to impart core functional properties to the film surface.

3 Protective film: Features a 0.06mm-thick PE protective film for safeguarding purposes.

4 Back coating: A specialized functional coating applied to the film's reverse side, capable of elevating the dyne value to 38 or higher while enhancing adhesion strength.

Product Color

WellP PET Film Roll - Alpine White

930Y - Ⅱ S/H

WellP PET Film Roll - Wabi-Sabi White

909Y - Ⅱ S/H

WellP PET Film Roll - Shell White

947Y - Ⅱ S/H

WellP PET Film Roll - Angora Gray

787Y - Ⅱ S/H

WellP PET Film Roll - Creamy Beige

859Y - Ⅱ S/H

WellP PET Film Roll - Cashmere Gray

786Y - Ⅱ S/H

WellP PET Film Roll - Almond Brown

836Y - Ⅱ S/H

WellP PET Film Roll - Nano Brown

739Y - Ⅱ S/H

WellP PET Film Roll - Bluebird Gray

789Y - Ⅱ S/H

WellP PET Film Roll - Dusk Cloud Gray

738Y - Ⅱ S/H

WellP PET Film Roll - Glazed Ink Gray

788Y - Ⅱ S/H

WellP PET Film Roll - Mystic Black

008Y - Ⅱ S/H

WellP PET Film Roll - Jaipur Red

309Y - Ⅱ S/H

WellP PET Film Roll - Mountain Green

616Y - Ⅱ S/H

WellP PET Film Roll - Moroccan Blue

517Y - Ⅱ S/H

WellP PET Film Roll - Midnight Purple

407Y - Ⅱ S/H

Product Performance

Extreme Environmental Friendliness

WellP Solid Color Super Matte Decorative Film use formaldehyde free and environmentally friendly materials, which have passed the US FDA food contact certification, Swiss SGS certification, and multiple medical grade raw material certifications, ensuring non-toxic and harmless properties, meeting food grade safety standards, and can directly contact the human body. Its excellent antibacterial performance can effectively inhibit bacterial growth, providing a green and healthy guarantee for the home environment. In addition, the product is recyclable and reusable, reducing its impact on the environment and perfectly aligning with the concept of environmental development.

Durable Performance

WellP Solid Color Super Matte Decorative Film have excellent durability, high impact resistance, outstanding wear and scratch resistance, as well as excellent corrosion resistance, oil resistance, and yellowing resistance. These features enable it to easily cope with various impacts, frictions, and environmental conditions in daily home use, facilitate cleaning, and effectively extend the product's service life, ensuring stable performance throughout long-term use.

Color Difference Remains Stable

WellP Solid Color Super Matte Decorative Film excel in color stability, accurately controlling color differences between different batches of products at extremely low levels, far exceeding industry standards. This excellent batch color difference stability ensures consistent color performance of the product during large-scale production, providing customers with precise and long-lasting visual experience.d

Fingerprint Resistant

WellP Solid Color Super Matte Decorative Film have excellent durability, high impact resistance, outstanding wear and scratch resistance, as well as excellent corrosion resistance, oil resistance, and yellowing resistance. WellP Solid Color Super Matte Decorative Film excel in color stability, accurately controlling color differences between different batches of products at extremely low levels, far exceeding industry standards. This excellent batch color difference stability ensures consistent color performance of the product during large-scale production, providing customers with precise and long-lasting visual experience.These features enable it to easily cope with various impacts, frictions, and environmental conditions in daily home use, facilitate cleaning, and effectively extend the product's service life, ensuring stable performance throughout long-term use.

Low Glossiness

WellP Solid Color Super Matte Decorative Film are endowed with nano level delicate wrinkles on their surface through nano light processing technology, and achieve extremely low matte visual effects through unique diffuse reflection principles. This ultra matte finish not only presents a low-key and rustic texture, but also brings a high-end and understated aesthetic experience, endowing the product with unique artistic charm.

Double Texture

WellP Solid Color Super Matte Decorative Film provide two distinct yet equally excellent tactile experiences in terms of texture presentation: sanding and sliding. When you choose a sandy texture and lightly touch it with your fingertips, you can feel the delicate sand like texture, with every stroke carrying just the right amount of lag; The smooth texture is like gently stroking silk, and wherever the fingers go, it is silky smooth and silky, with a skin friendly and smooth touch that is pleasant. Two texture options meet the needs of different aesthetics and usage scenarios.

Comparison Of Product Characteristics

NO.	Inspection Item		Test Method/Basis	Judgment Standard	Inspection Equipment
1	Product Size		Width	Slices width ±2.0mm, roll width ±2.0mm.	Tape measure
			Thickness	±0.02	Measure the position of 12 points evenly in the width direction
2	Surface Effect	Feel	Visual inspection, observe from different angles	Sand feel: obvious sand feel on the surface,	Feel
				Smooth feel: delicate surface texture, silky smooth feel.
		Raised grain texture		Uniform texture, consistent texture size.	High power microscope
3	Protective film		Visual inspection	No residual glue, no scratches, damage, wrinkles, blistering, film lifting, oil residue debris pollution, etc., and the edges are trimmed neatly.	Visual inspection
4	Color difference		GB/T 17657-2022 in 4.34	Visually consistent, no obvious difference, compared to the surface standard sample △E ≤0.5, color difference between batches E≤0.3.	Visual inspection, color difference meter
5	Hardness		GB/T 17657-2022 in 4.58	Hardness ≥H,	Electric pencil hardness tester/weight
				500g weight, Mitsubishi pencil 45° scratch, Note: Sample from the upper end at 100mm, take one sample each from the left, middle and right for testing, test 5 times for each sample, and it is qualified if no less than 4 times without scratches/scratches.
6	Wear resistance		ASTM F2496 ISO 1518-1 ISO 1518-2 GME 60248 D42 1775	≥10r The coating surface is under 750g/cm2 pressure, slight pinpoint scratches or no scratches on the friction position after 10 cycles.	Reciprocating wear testing machine/#0000 steel wool
7	Scratch resistance		GB/T 17657-2022 in 4.42	1.2N (60g),	Scratch resistance tester
				① No continuous scratches on more than 90% of the sample surface,
				② Coating thickness ≤10um,
				③ Front and back, horizontal, vertical and roll directions on a 3-inch core, no cracking is OK
8	Gloss	Sand feel	GB/T 9754-2007	White/Bright color series:	Gloss meter
				20° ≤1.5, 60° ≤4.5, 85° ≤10
				Other colors: 20° ≤1.0, 60° ≤3.0, 85° ≤10
		Smooth feel		White/Bright color series:
				20° ≤1.5, 60° ≤4.5, 85° ≤12
				Other colors: 20° ≤1.0, 60° ≤3.0, 85° ≤12
9	Stain resistance	Sand feel	GB/T 17657-2022 in 4.43	① No obvious discoloration after stain resistance test after 10 hours,	Huangyu liquid shoe polish, Nestle coffee 80℃ water, soy sauce, acetone, cola, aged vinegar, red ink, 6824 oily pen, 75% alcohol, nano sponge magic eraser
				② No obvious discoloration after acetone test after 30 minutes,
				③ Red ink is wiped with clean water,
				④ 6824 oily pen can be wiped off with 75% alcohol,
				⑤ 6824 oily pen can be wiped clean with a nano sponge magic eraser when dry,
				⑥ Oil stains/sweat oil on the head/cooking oil can be wiped off with alcohol/detergent,
				⑦ Ordinary sweat marks/sweat fingerprints on hands can be wiped off dry or disappear naturally.
		Smooth feel		① No obvious discoloration after stain resistance test after 10 hours,
				② No obvious discoloration after acetone test after 30 minutes,
				③ Red ink is wiped with clean water,
				④ 6824 oily pen can be wiped off with 75% alcohol,
				⑤ 6824 oily pen can be wiped clean with a nano sponge magic eraser when dry,
				⑥ Oil stains/sweat oil on the head/cooking oil can be wiped off with alcohol/detergent.
10	Water contact angle		GB/T 30693-2014	Test water with 3 microliters of water, contact angle ≥70°.	Water contact angle tester
11	Adhesion	Conventional	GB/T 17657-2022 in 4.57	≥4B, 3 times each for left, middle and right grid tests.	3M#600/681 (replacement 610) test tape/grid cutter, water bath
		Water boiling		≥4B, 80℃/30 minutes, natural cooling ≥10 minutes, no cracking
12	Yellowing resistance		GB/T 23983-2009	△E≤3	UV yellowing resistance test chamber
	(168hUVA340)		GB/T 17657-2022 in 4.32	(Surface oil: △E≤0.7)
13	Light fastness		GT/T 17657-2022 in 4.31	≥3 grade	Xenon arc lamp test box, 8-level blue wool standard sample, gray sample card
14	Winding		Packaging operation specification	1250mm×3 inch compression-resistant foam tube or polished tube, smooth surface, no unevenness, neat winding, no edge running, 250 meters/roll, protective film facing outwards.
15	Product packaging		Packaging operation specification	The tape is dark brown tape. After processing, first wrap it with stretch film, and the outer packaging is packaged with pearl foam packaging paper printed with LOGO. Both ends of the product are sealed and packaged with paper corner protectors and hardened corner protectors. The packaging should be complete and undamaged.	Visual inspection
16	Product identification Sample		Visual inspection	① Paste one large label (58mm218mm, 3 in total) with the same information on the upper right corner of the outer packaging paper logo, flush with the bottom of the corner protector, in the middle of the top, and in the center of the back of the A4 sample (210mm297mm). The identification is standardized, the content is comprehensive, clear, and correct.	Visual inspection
				② The content on the label should include: product name, product series, protective film name, product item number, product specifications, product quantity, base material number, surface treatment number, production date and other information.
				Standardized identification, comprehensive, clear, and correct content, consistent with the order content

WellP Product Packaging

Product packaging

The product packaging adopts carefully designed outer packaging combined with protective film,The overall visual clarity is clear and can effectively protect the product,More helpful for customers to quickly identify the brand and strengthen their brand impression.

Product application process

flat lamination process

1 Flat Lamination process: Flat lamination applies decorative film onto flat boards using PUR or hot-melt adhesive. This process delivers a smooth, seamless surface with excellent durability and a premium look. It is ideal for PET and PP films, providing superior scratch resistance, heat stability, and long-lasting color.

Wrapping Process

2 Wrapping process: Wrapping uses PUR glue to cover decorative films on profiles such as edge bandings, moldings, and skirting boards. PET and PP films offer higher durability and color consistency, ensuring a perfect match with laminated panels.

Vacuum Forming Process

3 Vacuum Forming Process: Vacuum forming shapes heated decorative film over 3D surfaces using vacuum pressure. It's widely used for routed MDF doors and complex profiles. While traditionally applied with PVC films, the market is now shifting toward more eco-friendly alternatives.