Product Series: Embossed
Regular sizes: 1250*0.25/1250*0.50
Thickness of the protective film: 0.05mm
With back coating: Yes
Product Colors:
Size, color and protective film can all be customized.
PET Embossed Decorative Film, utilizing PETG (Polyethylene Terephthalate - 1,4 -cyclohexanedimethanol) as the core material. It is manufactured by precisely blending color masterbatch and functional additives. After forming the base film through cast extrusion, specific patterns are embossed using specialized embossing techniques. Finally, a special functional coating is applied to the surface, resulting in a novel surface decorative material that combines decorative appeal, functionality, and environmental sustainability.
1 Base film: PETG (Polyethylene Terephthalate-1,4-Cyclohexanedimethanol) is a non-crystalline copolyester, formed by the copolymerization of three monomers: terephthalic acid (PTA), ethylene glycol (EG), and 1,4-cyclohexanedimethanol (CHDM).
2 Coating: Surface special functional coating, endowing the membrane surface with core functional characteristics
3 Protective film: Paired with a 0.05mm-thick PE protective film for added protection.
4 Back coating: Specific functional coating is applied to the back of the decorative film to increase the dynary value (up to 38 or more), and enhance adhesion.
732Y-ⅠW-ST
746YS-ⅠW-BZ
775Y-ⅠW-BP
504Y-ⅠW-FG
831Y-ⅠW-FG
902Y-ⅠW-FG
115YS-ⅠW-YZ
855YS-ⅠW-KJ
831Y-ⅠW-LZ
829Y-ⅠW-LZ
830Y-ⅠW-LZ
723Y-ⅠW-SN
724Y-ⅠW-SN
521YS-ⅠW-SW
724Y-ⅠW-XG
829Y-ⅠW-XG
723Y-ⅠW-XM
724Y-ⅠW-XM
831Y-ⅠW-XM
724Y-ⅠW-YS
Utilizing formaldehyde-free eco-friendly substrates, these materials have obtained multiple authoritative certifications including FDA and SGS for food-grade and medical-grade applications. Non-toxic and harmless, they are safe for direct human contact and possess natural antimicrobial properties. Additionally, they support recycling and reuse, fully aligning with green health and sustainable development principles.
Leveraging precision embossing technology, intricate textures such as wood grain, leather grain, stone patterns, and geometric designs can be accurately replicated on the film surface. This not only delivers a striking 3D tactile effect but also provides a realistic, finely textured feel, significantly enhancing both the visual sophistication and user experience of the product.
The PETG substrate itself combines excellent toughness with impact resistance, ensuring the decorative surface remains resistant to cracking or permanent deformation from bumps during transportation, installation, and daily use. Its surface undergoes professional hardening treatment, delivering outstanding wear resistance that effectively withstands routine wiping, friction, and scratches from hard objects, maintaining a pristine appearance over time.
PETG material offers excellent ductility and thermoforming capabilities, making it suitable for various deep processing techniques such as vacuum forming, wrapping, and bending. It perfectly conforms to complex substrates like irregular door panels without cracking or whitening. Additionally, it exhibits strong compatibility with diverse substrates including wood, metal, plastic, and fiberglass. By using compatible adhesives, it achieves secure bonding, enabling convenient and efficient installation.
Surface functional coatings provide superior stain resistance, preventing everyday spills like tea, grease, and sauces from penetrating or adhering. Simply wipe with a damp cloth for quick cleaning—no complicated procedures required. This significantly reduces daily maintenance costs, making it ideal for high-traffic areas prone to messes such as kitchens, bathrooms, and public spaces.
We offer customized product specifications in varying widths and thicknesses to meet specific application requirements, with flexible adjustments to texture patterns and color combinations. Whether for large-scale project procurement or small-batch personalized customization, we precisely match your needs to minimize cutting waste and enhance project adaptation efficiency.
| NO. | Inspection Item | Test Method/Basis | Judgment Standard | Inspection Equipment | ||
| 1 | Product size | Width | Slitting width ±2.0mm, coil width ±2.0mm. | Tape measure | ||
| Thickness (Measure 12 points evenly across the width) | Before Embossing (mm) 0.20-0.29 | After Embossing (mm) | Micrometer | |||
| 0.30-0.39 0.40-0.50 | -0.24 | |||||
| 2 | Surface treatment effect | Visual inspection, observe from different angles | The surface should be smooth and have a uniform color. There should be no missed coating, dirt, impurities, or broken oil residue. When illuminated with a strong flashlight from different angles, there should be no dense concave-convex points or dark textures. | Visual estimation | ||
| 3 | Texture | Visual inspection | Product texture, depth, and clarity should be maintained with no obvious difference from the sample. | Visual estimation | ||
| 4 | Protective film | Visual inspection | No residual glue stains, scratches, damage, wrinkles, blistering, air bubbles, oil residue debris contamination, or other defects are allowed. The edges should be trimmed evenly. | Visual estimation | ||
| 5 | Color | GB/T 17657-2022 in 4.34 | Visually consistent, with no obvious differences, compared to the standard sample △E≤0.5. | Visual inspection, color difference meter | ||
| 6 | Wear resistance | ASTM F2496 ISO 1518-1 ISO 1518-2 GME 60248 D42 1775 |
≥50r, apply 750g/cm2 pressure to the coating surface, and slight dotted scratches or no scratches on the friction position after 50 cycles. | Reciprocating abrasion testing machine /#0000 steel wool | ||
| 7 | Scratch resistance | Ordinary | / | / | / | |
| Scratch resistance Customized |
4.42 in GB/T17657-2022 | 1.2N (60g); | Scratch resistance tester | |||
| ① No continuous scratches on more than 90% of the specimen surface; | ||||||
| ② Coating thickness ≤ 10um; | ||||||
| ③ The front and back sides, transverse and longitudinal winding to a 3-inch core, no cracking is OK | ||||||
| 8 | Surface stain resistance | 4.43 in GB/T17657-2022 | ① After 16 hours, there is no obvious discoloration after the stain resistance test. | Huangyu liquid shoe polish, Nescafé coffee, 80℃ water, soy sauce, acetone, cola, aged vinegar, red ink, 6824 oily pen | ||
| ② After 30 minutes, there is no obvious discoloration after the acetone test. | ||||||
| ③ Red ink can be wiped off with clean water. | ||||||
| ④6824 Oily pen can be wiped off with dry wiping. | ||||||
| 9 | Contact Angle | GB/T 30693-2014 | Test water with 3 microliter water droplets, contact angle ≥88 °. | Water contact angle tester | ||
| 10 | Adhesion | Conventional | 4.57 in GB/T17657-2022 | ≥4B, 3 times for each of the left, middle, and right hundred-grid tests. | 3M#600/681 (alternative 610) test tape/cross cutter | |
| Boiling in water | / | |||||
| 11 | Yellowing resistance | GB/T23983-2009 | △E≤3 | UV yellowing resistance test chamber | ||
| (168hUVA340) | 4.32 in GB/T17657-2022 | (Surface oil: △E≤0.7). | ||||
| 12 | Lightfastness | 4.31 in GT/T17657-2022 | ≥ Level 3. | Xenon arc lamp test chamber, 8-level blue wool standard sample, gray sample card | ||
| 13 | Rewinding | Packaging operation specification | 1250mm × 3-inch compression-resistant foam tube or polished tube, smooth surface, no unevenness, neat winding, no running edges, 250 meters/roll, protective film facing outward. | Visual estimation | ||
| 14 | Product packaging | Packaging operation specification | The tape is dark blue. After processing, first wrap with stretch film, then wrap the product horizontally with tape 3-5 times to prevent the product from shifting sideways. The outer packaging is wrapped with pearl foam packaging paper printed with the LOGO, and both ends of the product are sealed and packaged with paper protective panels and hardened corner protectors. The packaging should be complete and undamaged. | Visual estimation | ||
| 15 | Product Identification Sample |
Visual inspection | ① On the outer packaging paper, aligned with the top center position directly above the logo and below the corner protectors, affix one large label (58mm*218mm, 3 labels in total) with identical information, centered on the back of an A4 sample (210mm*297mm). The labeling should be standardized, comprehensive, clear, and accurate. | Visual estimation | ||
| ② The label should include the following information: Product Name, Product Series, Protective Film Name, Product Article Number, Product Specifications, Product Quantity, Base Material Number, Surface Treatment Number, Production Date, and other information. | ||||||
| ③ Label information, physical object, A4 sample, the three must be consistent. | ||||||
*For specific performance data and parameters, please download them from the Resource Center.
The product packaging adopts carefully designed outer packaging combined with protective film,The overall visual clarity is clear and can effectively protect the product,More helpful for customers to quickly identify the brand and strengthen their brand impression.
1 Flat Lamination process: Flat lamination applies decorative film onto flat boards using PUR or hot-melt adhesive. This process delivers a smooth, seamless surface with excellent durability and a premium look. It is ideal for PET and PP films, providing superior scratch resistance, heat stability, and long-lasting color.
2 Wrapping process: Wrapping uses PUR glue to cover decorative films on profiles such as edge bandings, moldings, and skirting boards. PET and PP films offer higher durability and color consistency, ensuring a perfect match with laminated panels.
Special Note: Wrapping Process requires customized specifications and coating formulations.
3 Vacuum Forming Process: Vacuum forming shapes heated decorative film over 3D surfaces using vacuum pressure. It's widely used for routed MDF doors and complex profiles. While traditionally applied with PVC films, the market is now shifting toward more eco-friendly alternatives.
Special Note: Vacuum Forming Process requires customized specifications and coating formulations.
1 Living Room Space
2 Bedroom Space
3 Dining & Kitchen Space
Products
Address
Office Address: Room 201, No. 22, Woodworking Machinery City, Lunjiao Street, Shunde District, Foshan City, Guangdong Province, China
Material factory: No. 11-12, Chuangye 5th Road, Mapu'ao Industrial Zone, Sanlian Village, Fenggang Town, Dongguan City, Guangdong Province, China
Coating factory: No. 105, Yati South First Road, Shanhe Village, Qiaotou Town, Dongguan City, Guangdong Province, China
Copyright© 2025 WellP New Materials (Foshan) Co.,Ltd. All Rights Reserved
Home
